GE DV-354 Digital Out, Dolby Digital Out, menu, Using the Initial Settings, Digital Audio Out settings, cThe lnltlal--Settingsi~~Menu, On, Dolby, Dolby Digital

cThe lnltlal--Settingsi ~~Menu__-

Using the Initial Settings	Digital Audio Out settings
menu

The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1Press SETUP and select ‘Initial Set- tings’ from the on-screen display.

Digital Out

•Default setting: On

You only need to make this setting ifyou connected this system to an AV receiver (or other component) using one of the digital

outputs.

Q lnittd ssttings

ut	Dolby Digilal Out	Z	:
LungWM	DTS Out		.’ . . ..I . . . .
Display	96kHzPCMOui	..	.	::.
Options	MPEG Out			. I :.
			,..	‘:

2Select the setup category from the list on the left, then select an item from the menu list to the right.

3Make the setting you want.

a Note

•The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region.

If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.

Note that you can’t switch on/off the optical and coaxial outputs individually.

Dolby Digital Out

•Default setting: Dolby Digital

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Q lnitiel Settings

If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby

Digital > PCM.

A

R

Er