Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Before you call for service…

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem

Possible Causes

What To Do

 

 

 

Top burners do not light

Plug on range is not completely

Make sure electrical plug is plugged into a live, properly

or do not burn evenly

inserted in the electrical outlet.

grounded outlet.

Burner hole or slits on the side Remove the burners (on models with standard twin

of the burner may be clogged. burners) or burner heads and caps (on models with sealed burners) and clean them with a sewing needle or twist-tie. Make sure you do not enlarge the holes.

On sealed burner models, check and clean the electrode area for burned-on food or grease.

 

Improper burner assembly.

Make sure the burner parts are installed correctly.

 

 

See the Care and cleaning of the range section.

 

 

 

Burner flames very

Improper air to gas ratio.

If range is connected to LP gas, contact the person

large or yellow

 

who installed your range or made the conversion.

 

 

 

Surface burners light

The oven gas shut-off valve

To check the oven gas shut-off valve on sealed burner

but oven does not

may have accidentally been

models, remove the storage drawer or kick panel (see

 

moved during cleaning or

the Care and cleaning of the range section) and look for

 

moving.

the gas shut-off lever at the back of the range.

Lever is

shown closed.

PULL TO OPEN.

Sealed burner models

To check the oven gas shut-off valve on standard twin burner models, raise the cooktop and look for the gas shut-off lever at the extreme right rear corner. Follow the directions in box A or B that match your regulator type.

Lever is shown closed.

A

Lever is shown closed.

B

PULL TO OPEN.

 

PULL TO OPEN.

 

 

 

 

Standard twin burner models

Standard twin burner models

 

 

 

 

 

 

 

Control signals after

You forgot to enter a bake

Touch the BAKE pad and desired temperature or

entering cooking time

temperature or cleaning time.

the SELF CLEAN pad and desired clean time.

or start time

 

 

 

 

 

 

 

 

 

 

 

 

Clock and timer

Plug on range is not completely

Make sure electrical plug is plugged into a live,

do not work

inserted in the electrical outlet.

 

properly grounded outlet.

 

 

 

 

 

 

 

 

 

A fuse in your home may be

Replace the fuse or reset the circuit breaker.

 

blown or the circuit breaker

 

 

 

 

 

 

tripped.

 

 

 

 

 

 

 

 

 

 

 

 

Oven controls improperly set.

See the Using the clock and timer section.

44

Page 44
Image 44
GE EGR3000 installation instructions Before you call for service…, Problem Possible Causes What To Do

EGR3000 specifications

The GE EGR3000 is a cutting-edge gas turbine engine designed to meet the demands of modern power generation and transportation applications. This innovative engine showcases a range of advanced features and technologies that enhance its performance, efficiency, and reliability.

One of the key characteristics of the EGR3000 is its exceptional efficiency. The engine employs an advanced thermodynamic cycle, which incorporates a high compression ratio and an innovative cooling design. This efficiency is particularly important in reducing fuel consumption and emissions, making it an environmentally friendly option compared to traditional gas turbines. The EGR3000 boasts a thermal efficiency rating that places it among the highest in its class.

The EGR3000 utilizes a dual-fuel capability, allowing it to operate on a variety of fuels. This flexibility is crucial for operators looking to optimize their fuel use based on availability and cost, adding to the engine's versatility. Additionally, the engine is designed to accommodate both natural gas and liquid fuels, thereby enhancing its operational range.

Another notable feature is the engine's advanced modular design. This allows for easier maintenance and quicker turnaround times, minimizing downtime and operational costs for power plants and industrial facilities. The modular components can be replaced or serviced individually, which simplifies maintenance procedures and enhances overall reliability.

In terms of technology, the EGR3000 incorporates sophisticated materials and coatings that improve thermal resistance and durability. High-performance blades and combustion chambers are designed to withstand extreme temperatures, resulting in longer service life and reduced maintenance frequency. The engine also employs digital control systems that optimize performance parameters in real-time, ensuring peak efficiency under varying load conditions.

Emissions control is a critical aspect of the EGR3000's design. It features advanced combustion technology that minimizes NOx and CO2 emissions, aligning with stringent environmental regulations. The engine's design enables it to operate with lean-burn technology, further supporting reduced environmental impact.

Overall, the GE EGR3000 stands out as a powerful and efficient gas turbine solution. Its combination of high efficiency, fuel flexibility, modular design, and advanced emission control technologies makes it an ideal choice for various applications, including power generation and industrial processes. As energy demands continue to evolve, the EGR3000 positions itself as a reliable and forward-thinking solution for today’s energy landscape.