System Verification
5. Problem? Check the following for a solution before calling our toll free “HELP” number at
The following procedure should be used to test system configuration and identify possible system connection errors. The phone must be con- nected to the AC power supply, lines 1 and 2 must be connected to the line 1, 2 jack, and the phone must have been programmed with an inter- com station address.
1.Press the line 1 button. The line 1 LED and speakerphone LED should turn green and dial tone should be heard from the speaker,
2, Dial the number for line 2. A three beep call pending tone should be heard and the LED for line 2 should rapidly flash red with the ring signal. If the LED for line 2 does not flash then line 2 is improperly connected to the phone.
3.If your configuration utilizes line 3 and/or line 4, repeat steps 1 and 2 substituting the respective phone number(s) in step 2.
