GE Feb-50 Install Desk or 3. Table Top Telephones, B. Note, This Step Is Essential, 9-41

Install Desk or

3. Table Top Telephones

/MPORTANZ Telephone line cords must be con- nected (Steps D through F) before AC power con- nection is made (Step G). Please follow these steps in their proper sequence.

The GE 2-9450 telephone has been factory assembled for use on a desk or table.

A. Remove the clear ACRYL/C COVER that covers the MEMORY /NDEX. Carefully remove the MEMORY INDEX CARD and the QUICK REFERENCE GUIDE.

B. NOTE:	THIS STEP IS ESSENTIAL.	1
You must install a 9V Alkaline Battery. It provides
back-up power to preserve numbers in memory
and any other stored information in the event of
any interruption of AC power to the telephone.
More importantly it allows use of the phone
during	power outages.

Unscrew the BATTERY COVER. Pull the battery re- moval ribbon so that it extends out of the top of the bat- tery compartment. Insert a 9V Alkaline Battery (Not Provided) and replace the BATTERY COVER.

C. In pencil, write in all the users’ names you’ve list- ed on the worksheet under the appropriate station numbers on the MEMORY /NDEX CARD. Replace the QUICK REFERENCE GUIDE, MEMORY lN- DEX CARD and the ACRYLIC COVER.

D. Connect one end of a LONG TELEPHONE L/NE CORD to the jack on the back of the telephone Iabelied L/NE 1-2. Connect the other end to the jack(s) Iabelled 1 & 2 either:

1.directly to the wall jack if it is a two-line RJ14 jack.

OR

9-41

2.to a two line adapter (not provided) if you have two single line RJ1l jacks for lines 1 & 2. Con- nect the adapter to the wall jacks with short telephone line cords (Not Provided).

&&~7