Quartz QZ3111 manual Quartz Thermo installation guide, ring and the white temperature preset

17	Refit the lilac temperature preset override
	ring and the white temperature preset

location ring if removed prior to installation, taking care to fit the override ring in the correct orientation as outlined in step 5. Prior to replacing the shroud, ensure the shroud seal is in position as indicated.

18	Replace the shroud ensuring that it is fully
	fitted against the shroud support ring as

shown.

19	Using a silicone based lubricant or liquid
	soap, lubricate the wall plate seal. Apply a

thin bead of silicone mastic into the groove on the rear of the wall plate and carefully push the wall plate into position flush with the wall.

20	Depress the maximum temperature stop
	button and replace the temperature lever

onto the valve in the full cold (9 o’clock). Replace the four screws to secure the lever to the valve hand tight only.

21 Ensuring the fixing lugs and locating pins are correctly aligned, carefully place the temperature lever cover plate onto the temperature lever and click into position.

22 Re-fit the on/off lever assembly onto the on/off shaft ensuring the corresponding flat faces are correctly aligned. Secure the on/off lever to the valve using the screw provided in the screwpack hand-tight only.

Shroud support ring

Shroud seal

Quartz Thermo installation guide page 8