GEAppliances.com
PROPER INSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling 800.GE.CARES (800.432.2737).
Ensure that the hot water hose is connected to the “H” (internal red screened) valve and the cold water hose is connected to the “C” (internal blue screened) valve.
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the warranty.
Properly ground washer to conform with all governing codes and ordinances. Follow details in Installation Instructions.
WARNING 
- Electrical Shock Hazard
Plug into a grounded 3 prong outlet. DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to do so can result in death, fire or electrical shock.
Optional drain hose extension recommended for discharging heights from 60” - 96”.
This washer does not include water supply hoses.
GE strongly recommends the use of factory specified parts. A list of factory hoses available for purchase are listed. These hoses are manufactured and tested to meet GE specifications.
GE strongly recommends the use of new water supply hoses. Hoses degrade over time and need to be replaced every 5 years to reduce the risk of hose failures and water damage.
Parts and Accessories
Order
Part Number | Accessory |
PM14X10002 | 4 ft Rubber Water Supply Hoses |
Or |
|
PM14X10005 | 4 ft Braided Water Supply Hoses |
WH49X301 | Drain Hose Extension |
WX10X10011 | Tide® Washing Machine Cleaner* |
WX7X1 | Washer Floor Tray |
DR07X10005 | 6’ Cable |
¥ |
| FUNCTIONALITY CHECK |
|
| If the lid is opened between cycles (i.e. not pausing and | If the lid is opened during this 15 second period, the word | |
|
| ||
|
| restarting the current cycle, changing cycles after it | PAUSE will start scrolling across its display. You will have |
|
| started, etc.) pushing the Start button will cause the | to push the Start button again to restart the cycle. |
|
| washer to turn on the cold water for 5 seconds followed |
|
|
| by a 10 second delay before locking the lid and starting |
|
|
| the cycle. |
|
|
| WHEN NOT IN USE |
|
|
| Turn off water faucets to minimize leakage if a break or |
|
|
| rupture should occur. Check the condition of the fill hoses; |
|
|
| GE recommends changing the hoses every 5 years. |
|
SAVE THESE INSTRUCTIONS
* Tide® is a registered trademark of Procter & Gamble | 3 |
