About storage drawer and cover removal.

GEAppliances.com

 

 

Not all features are on all models.

Humidity Controlled Drawer (on some models)

Slide the control all the way to the HIGH setting to provide high humidity recommended for most vegetables.

Slide the control all the way to the LOW setting to provide lower humidity levels recommended for most fruits.

Drawer Removal

Drawers can be removed easily by grasping the sides and lifting up slightly while pulling drawers past the stop location.

Cover Removal

To remove:

Remove the drawers.

Reach in, push the back of glass cover up, and at the same time, pull it backward as far as it will come.

Tilt it and take it out. Avoid cleaning the cold glass cover with hot water because the extreme

WHPSHUDWXUHGLȺHUHQFHPD\FDXVHLWWREUHDN

Remove the drawer frame. (Always remove the glass cover before you take out the drawer frame.)

/LIWWKHIUDPHRȺWKHVXSSRUWVDWHDFKVLGHDQG back, pull it forward, tilt it and take it out.

To replace:

Lower the frame until it rests on the supports at each side and back.

Replace the glass cover, pushing its front

HGJH¿UPO\LQWRWKHIURQWIUDPHFKDQQHO and gently lowering the back into place.

Replace the drawers.

About the automatic ice maker

A newly-installed refrigerator may take 12–24 hours to begin making ice.

Ice maker

ON OFF

Feeler Arm Power Switch

CAUTION Avoid contact with the moving parts of the ejector mechanism, or with the heating element (located on the bottom of the ice maker) that releases the

FXEHV'RQRWSODFH¿QJHUVRUKDQGVRQWKH

automatic ice making mechanism while the refrigerator is plugged in.

Automatic Ice maker (on some models).

The ice maker will produce approximately

70-100 cubes in a 24-hour period, depending on the freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the ice maker, set the switch OFF.

When the refrigerator has been connected to the water supply, set the switch ON position.

7KHLFHPDNHUZLOO¿OOZLWKZDWHUZKHQLWFRROVWR 15°F. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Once the ice maker starts to make ice, it may take

XSWRKRXUVWR¿OOWKHELQGHSHQGLQJRQWKH temperature settings and number of door openings.

You will hear a buzzing sound each time the ice

PDNHU¿OOVZLWKZDWHU

NOTICE: 7KURZDZD\WKH¿UVWIHZEDWFKHVRILFH to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

:KHQWKHELQ¿OOVWRWKHOHYHORIWKHIHHOHUDUPWKH ice maker will stop producing ice.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale, shrink or fuse together.

Ice maker accessory kit:

If your refrigerator did not already come equipped with an automatic ice maker, an ice maker accessory kit is available at extra cost.

&KHFNWKHEDFNRIWKHUHIULJHUDWRUIRUWKHVSHFL¿F

ice maker kit needed for your model.

5

Page 5
Image 5
GE GTE18GTHWW About the automatic ice maker, Humidity Controlled Drawer on some models, Drawer Removal, Cover Removal