GEAppliances.com

Safety

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Move the refrigerator control to the 1 (off) position and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.

Set the icemaker power switch to the O (off) position or move the feeler arm to the STOP (up) position (depending on model) and shut off the water supply to the refrigerator.

If the temperature can drop below freezing, have a qualified servicer drain the water supply system (on some models) to prevent serious property damage due to flooding.

Operating Instructions

Preparing to Move

Secure all loose items such as grille,

Be sure the refrigerator stays in an upright position

shelves and drawers by taping them

during moving.

securely in place to prevent damage.

 

Replacing the light bulb.

Setting either or both controls to 1 (off) does not remove power to the light circuit.

Installation Instructions
Refrigerator Compartment—Upper Light

CAUTION: Light bulb may be hot.

Unplug the refrigerator.

The bulb is located at the top of the compartment near the opening.

Replace with an appliance bulb of the same or lower wattage.

Plug the refrigerator back in.

Support Consumer Tips Troubleshooting Instructions

11