Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Step-by-step installation instructions.

Feed Water Supply

Check and comply with local plumbing codes as you plan, then install a cold feed water supply fitting. For new home installation using standard plumbing fittings, see first two illustrations below.

A typical installation for existing homes using the saddle valve is shown in third illustration below.

A. PREFERRED INSTALLATION

1

Turn off the cold water supply.

 

2

Complying with plumbing codes, install a fitting on the cold water pipe to adapt 3/8″ OD tubing.

A typical connection is shown in illustrations at right (parts not included). Make sure a water

 

supply valve is used.

 

Fig. 2A.

Preferred water supply connection

 

 

(using compression fitting)

Typical location

 

 

 

Water supply valve

 

 

Insert (not included)

 

 

Ferrule

 

 

Cold

 

 

water

 

Cold

pipe

 

water

3/8tubing to inlet

B. OPTIONAL HOME INSTALLATION Where codes permit

*For 1/2 OD or larger metal tubing only.

NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of the saddle valve. For installation, use plumbing code 248-CMR of the Commonwealth of Massachusetts.

1 Turn off the cold water supply and attach saddle valve as shown in illustration at right.

DANGER: To protect yourself from serious injury or fatal shock, use a battery-powered hand drill only to make the hole. DO NOT USE AN ELECTRIC DRILL.

2 Close the water supply valve by turning the handle clockwise.

3 Open the main water supply valve and several house faucets to purge air from the system. Close faucets when water runs smoothly.

Optional water supply connection (using saddle valve)*

Consumer Support

Fig. 2B.

Some threads should be visible

Rubber gasket

12

*For 1/2 OD or larger metal tubing only.

Nut (2)—not

 

 

required if holes

Pre-drill

 

in clamp are

1/4hole

Seal—make sure the

threaded

 

 

seal is in place

Snug valve into bracket

 

 

 

DO NOT OVERTIGHTEN

 

Clamp X

 

 

Clamp Z

 

Valve

 

 

Washer

Tubing adapter

Handle

Compression nut

Use to connect the tubing

Page 12
Image 12
GE GXRV10ABL01 Step-by-step installation instructions, Feed Water Supply, For 1/2 ″ OD or larger metal tubing only

GXRV10ABL01 specifications

The GE GXRV10ABL01 is a sophisticated variable frequency drive (VFD) designed to enhance efficiency in various industrial applications. Characterized by its versatility and advanced technologies, this device is ideal for controlling the speed and torque of electric motors, making it an integral component for modern automation systems.

One of the most notable features of the GE GXRV10ABL01 is its compact design, which allows for easy integration into existing systems without requiring significant modifications. This space-saving characteristic makes it suitable for a range of environments, including manufacturing floors, processing plants, and HVAC systems.

The GXRV10ABL01 is equipped with cutting-edge control technologies that improve performance and energy efficiency. It utilizes advanced algorithms for precise motor control, enabling smooth acceleration and deceleration while minimizing energy consumption. This enhances the overall efficiency of processes such as pumping, fans, and conveyors.

Another key feature is its robust communication capabilities. The GXRV10ABL01 supports a variety of communication protocols, including Ethernet/IP, Modbus, and Profinet. This interoperability allows for seamless integration with other control systems and facilitates real-time monitoring and data exchange, supporting Industry 4.0 initiatives.

User-friendly programming and operation are facilitated by the drive's intuitive interface. The built-in keypad allows for straightforward configuration and adjustments, while the ability to connect to external displays enhances usability. Furthermore, the drive supports various programming options, enabling customization to meet specific application requirements.

Safety features are paramount in the design of the GE GXRV10ABL01. It comes equipped with built-in protection mechanisms, including overcurrent, overvoltage, and thermal overload protection. These safety measures help to prevent damage to both the drive and connected machinery, ensuring reliable operation and longevity.

Durability is another hallmark of the GXRV10ABL01. Its rugged construction and high-quality components make it resilient against harsh environments, withstanding fluctuations in temperature, dust, and moisture. This makes it a dependable choice for diverse industrial applications.

In summary, the GE GXRV10ABL01 is a state-of-the-art variable frequency drive that combines advanced control technologies, robust communication capabilities, and essential safety features. Its compact design, user-friendly interface, and durability ensure it meets the demands of modern industrial automation, providing greater efficiency and reliability for critical operations.