www.geappliances.ca
Tones at the End of a Timed Cycle
Safety
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous
To cancel the
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.
Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Press the START pad.
Instructions Operating
Tone Volume
This feature allows you to adjust the tone volumes to a more acceptable volume. There are three possible volume levels.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.
Press the OVEN LIGHT ON/OFF pad. The display will show 2 BEEP. This is the middle volume level.
Press the OVEN LIGHT ON/OFF pad again. The display will show 3 BEEP. This is the loudest volume level.
Press the OVEN LIGHT ON/OFF pad again. The display will show 1 BEEP. This is the quietest volume level.
For each time the level is changed, a tone will sound to provide an indication of the volume level.
Choose the desired sound level (1 BEEP, 2 BEEP or 3 BEEP).
Press the START pad to activate the level shown.
Instructions Care and Cleaning
Using Auto Recipe™ Conversion
When using convection bake, the Auto Recipe™ Conversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.
Once the feature is activated, the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START pad, the display will show CON
and the converted temperature of 325°F.
NOTE: This feature does not convert convection bake cooking times, only temperatures.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.
Press the CONVECTION BAKE pad. The display will show CON OFF. Press the CONVECTION BAKE pad again. The display will show CON ON.
Press the START pad.
To deactivate the feature, repeat steps
Troubleshooting Tips Consumer Support
7