GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. (Fig. 1)

WARNING-ImproPer

use of the grounding plug can-result in a risk of electric shock.

PREFERRED

@lQ

METHOD ‘\

 

%

 

Q

 

‘a

H/

f l

n --h

 

INSUREPROPER

 

GROUNDEXISTS

Fig. 1

BEFOREUSE

Consult a qualified electrician or service technician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Where a standard two-prong wall receptacle is encountered, it is your personal responsibility and obligation to have it replaced with

aproperly grounded three-prong wall receptacle.

Do not under any circumstances cut or remove the third (ground) prong from the power cord.

Use of Adapter Plugs

Usage situations where appliance’s power cord will be disconnected infrequently.

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug. However, if you still elect to use an adapter, where local codes permit, a

TEMPORARY CONNECIYON may be made to a properly grounded two-prong wall receptacle by the use of a UL listed adapter (Fig. 2) which is available at most local hardware stores.

TEMPORARYMETHOD

(ADAPTERPLUGSNOT PERMITTEDIN CANADA)

ALIGN LARGE

PRONGS/SLOTS

 

INSUREPROPER

 

GROUNDAND

 

FIRMCONNECTIO’

Fig. 2

BEFOREUSE

 

The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.

Caution: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded through the house wiring. Youshould have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOI’ USE the appliance until a proper ground has again been established.

Usage situations where appliance’s power cord will be disconnected frequently.

Donot use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. Youshould have the two-prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualified electrician before using the appliance.

Use of Extension Cords

1.A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

2.Longer cord sets or extension

cords are available and may be used if care is exercised in their use.

3.If a long cord or extension cord is used, (1)the marked electrical rating of the cord set or extension cord should beat least as great as the electrical rating of the appliance,

(2) the extension cord must be a grounding-type 3-wire cord, and

(3) the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally.

If you do use an extension cord with your microwave oven, the interior light may flicker and the blower sound may vary when oven is in use. Cook times maybe longer as well.

19

Page 19
Image 19
GE JEM31H manual Use of Adapter Plugs, Use of Extension Cords

JEM31H specifications

The GE JEM31H is a state-of-the-art electric locomotive that has garnered attention for its exceptional performance and innovative features. Designed and manufactured by General Electric, the JEM31H is primarily utilized in freight transport, showcasing advanced engineering that caters to both efficiency and reliability.

One of the standout features of the JEM31H is its powerful traction system. The locomotive is equipped with efficient, high-output traction motors that provide excellent acceleration and speed capabilities. This is paired with a robust electric drive system that ensures optimal energy use while maintaining strong pulling power, making it ideal for heavy freight services. The JEM31H can handle various terrains, ensuring versatility in operational applications.

The locomotive is also known for its fuel efficiency, thanks to its advanced propulsion management technologies. The system utilizes regenerative braking, which converts kinetic energy back into electricity during braking, reducing the overall fuel consumption. This feature not only makes the JEM31H environmentally friendly but also lowers operational costs for railway operators.

In terms of design, the GE JEM31H boasts a sleek and aerodynamic exterior that enhances its overall performance at higher speeds. The cab is designed for optimal visibility and operator comfort, featuring advanced control systems that simplify operations. Moreover, the locomotive is equipped with various safety technologies, including advanced signaling systems and automatic train control capabilities, ensuring safe and efficient operations on the railway.

The GE JEM31H is characterized by its modular construction, allowing for easy maintenance and upgrades. This feature reduces downtime and enhances productivity, making it a favorite among operators seeking reliable rail solutions. Additionally, the locomotive is built to withstand tough working conditions, with a robust chassis and weather-resistant components that ensure longevity.

With its combination of power, efficiency, and advanced technology, the GE JEM31H stands out as a leading choice for freight operations. Railway companies that invest in this locomotive benefit from improved performance metrics and a reduced environmental footprint, making the JEM31H an attractive option in today’s competitive rail industry. From cutting-edge design to exceptional operational capabilities, the GE JEM31H exemplifies what modern locomotives can achieve in the field of freight transport.