How to Use the Minute/Second Timer
The MIN/SEC TIMER has three timing functions:
●It operates as a minute timer.
●It can be set to delay cooking.
●It can be used as a hold setting after defrosting.
The MIN/SEC TIMER operates without microwave energy.
How to 13me a 3-Minute Phone Call
1.Touch MIN/SEC TIMER pad. The display shows :0 and “ENTER TIME” flashes.
2.Touch number pad 3 and MIN (for
3minutes and no seconds). Display shows 3:00 and “TIME” flashes.
3.Touch START. Display shows “TIME” and time counting down.
4.When time is up, oven signals, flashes “EndJ’ and display shows time of day.
Programming a HOLD TIME
The Minute/Second Timer can also be used to program “hold time” between microwave cooking fimctions. The time can range from one second to 99 minutes and 99 seconds. A HOLD, or “standing” time may be found in some of your own recipes or cookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds, touch TIME COOK I & II, TEMP COOK/HOLD or AUTO ROASTand enter cook time, temp, or code. Touch MIN/SEC TIMER and enter number of minutes to delaycooking.TouchST~. Tmer counts down to zero and cooking begins. When delaying temperature or Auto Roast cooking, be sure probe is in food before pressing START.
How to Manual Defrost, Hold and Time Cook
Let’ssay you wantto defrosta frozen casserole for 15minutes, hold for 10minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer and place in oven.
Step2: TouchTIME DEFROST pad.
The display shows :0 and “POWER 3:’ “ENTER DEF TIME” flashes.
Step 3: Touch pads 1,5 and MIN for 15minutes defrosting time. 15:00 appears on display. (Defrosting is automatically set on power level 3 but can be changed by touching the POWER LEVEL pad and the desired power level.)
Step 4: Set standing or hold time by touching MIN/SEC TIMER. The display shows :0 and “ENTER TIME” flashes.
Step 5: Touch 1,0 and MIN to hold for ten minutes. 10:00 appears on display and “TIME” flashes.
Step 6: Touch TIME COOK I & II pad. The display shows :0 and “POWER 10:’ “ENTER COOK TIME” flashes.
7
Step %Touch 2,5 and MIN for
Step 8: TouchST~. “DEF TIME” and 15:00 counting down show
on display. As each function is automatically performed oven display shows instructions entered and the function.
Step 9: When time is up, the oven signals and flashes “End?’
Questions and Answers
Q. What will happen if I accidentally reverse my defrost, hold and cook instructions?
A.The oven will automatically rearrange your program. Defrosting will always come first, then hold, and then the cooking function.
Q.Can I defrost and hold only?
A.Yes. Sometimes you may only want to defrost a food, hold it, and cook it later. All you need to do is program in Defrost and amount of time. Then program Hold and the amount of time. Be sure to put the thawed dish in the refrigerator promptly.
NOTE: Let foods remain at room temperature only as long as safe. Times will vary.
Q.I programmed my oven for a specific defrosting time but it defrosted longer than necessary. What happened?
A.When instructions conflict, the oven carries out the last instruction. Youmay have set the oven to Defrost for 4 minutes, Hold/Time for 2 minutes, and then Defrost for 6 minutes. In this case, the ovenwould Defrost for 6 minutes and Hold/Time for 2 minutes.
