:movable Oven Bottom

The oven bottom can be removed to make cleaning easier.

To remove:

1.Grasp the oven bottom at finger slots on each side.

2.Lift front edge of the oven bottom enough to raise the tabs from slots in the front frame.

3.Push the oven bottom back about 1/4” to release the flange from the front frame, then pull out.

To replace the oven bottom:

1.Slide the oven bottom into the oven so rear tabs fit into slots in the rear wall of the oven.

2.Grasp the oven bottom at finger slots and push it back and then down to hook the flange under the front frame.

3.Fit the front tabs into slots in front frame.

The oven bottom has a porcelain enamel finish. To make cleaning easier, protect the oven bottom from excessive spillovers. This is particularly important when baking a fruit pie or other foods with “- “h acid content. Hot fruit fillings or foods that are

Jic in content such as milk, tomato or sauerkraut and sauces with vinegar or lemon juice, may cause pitting and damage to the porcelain enamel surface.

To protect the oven bottom surface, place a

piece of aluminum foil slightly larger than the baking dish on the shelf below to catch any boilovers. It should not completely cover the shelf as this would cause uneven heat in the oven. Aluminum foil should not be placed on the oven bottom.

If a spillover does occur on the oven bottom, allow the oven to cool first. Remove the oven bottom for easier cleanup and to prevent damage to the continuous cleaning oven coating.

Frequent wipings with mild soap and water (particularly after cooking meat) will prolong the time between major cleanings. Rinse thoroughly. Soap left on the oven bottom can cause stains.

For heavy soil, use a mild abrasive cleaner and follow label instructions, using a thin layer of cleaner. Use of rubber gloves is recommended. Wipe or rub lightly on stubborn spots. A commercial oven cleaner may also be used, following package directions.

Painted Surfaces

Painted surfaces include the control panel and drawer front. Clean these with soap and water or a vinegar and water solution. Do not use commercial oven cleaners, cleansing powders, steel wool or harsh abrasives on any painted surface.

(continued next page)

23

Page 22 Page 24
Page 23
Image 23
GE 164D2966P053, JGSC12 operating instructions Movable Oven Bottom, Painted Surfaces, To replace the oven bottom
Page 22 Page 24

164D2966P053, JGSC12 specifications

The GE JGSC12,164D2966P053 is a state-of-the-art industrial generator set specifically designed to meet modern energy demands. Renowned for its robust performance and reliability, this generator set is a prime choice for various applications, including backup power for commercial buildings, industrial facilities, and critical infrastructure.

One of the standout features of the GE JGSC12 is its advanced power generation technology. It utilizes a high-efficiency diesel engine that is engineered for optimal fuel consumption while delivering an impressive output. This ensures that users experience lower operating costs and reduced carbon emissions, aligning with global sustainability initiatives.

The generator set is equipped with an integrated digital control system that enhances both monitoring and operational efficiency. This sophisticated system allows for real-time tracking of performance metrics, making it easier for operators to manage the generator and perform necessary maintenance. Safety features, including overload protection and automatic shutdown mechanisms, are built into the control system, ensuring that users can operate the generator with confidence.

Another notable characteristic of the GE JGSC12 is its modular design. This allows for easier transport and installation, making it suitable for a variety of applications, from construction sites to remote locations. The compact footprint ensures that it can fit into tight spaces without compromising on power output.

Additionally, the generator set's sound attenuation capabilities make it one of the quieter options on the market. This is particularly important for urban environments where noise pollution is a concern. The carefully engineered noise reduction features ensure that the generator operates without disturbing the surrounding community.

Furthermore, the GE JGSC12 has been tested for rugged reliability in extreme conditions. Whether faced with high temperatures or inclement weather, this generator set is built to withstand the elements, providing uninterrupted power when it is needed most.

In summary, the GE JGSC12,164D2966P053 is a powerful, efficient, and reliable generator set that incorporates cutting-edge technologies and features. With its sophisticated control system, modular design, and environmental considerations, it stands out as an excellent solution for a wide range of power generation needs in various sectors.
Top Page Image Contents