Never block the vents (air openings) of the range, They provide the air inlet and outlet that

are necessary for the range to operate properly with correct combustion. Air openings are located at the rear of the cooktop and at the top of the oven door.

Do not use a wok on the cooking surface if the wok has a round metal ring that is placed

over the burner grate to support the wok. This

ring acts as a heat trap, which may damage the burner grate and burner head. Also, it may cause the burner to work improperly. This may cause a carbon monoxide level above that allowed by current standards, resulting in a health hazard.

Foods for frying should be as dry as possible.

Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan.

Use the least possible amount of fat for effective shallow or deep-fat frying. Filling the pan too

full of fat can cause spillovers when food is added.

-If a combination of oils or fats will be used

.1 frying, stir together before heating or as fats melt slowly.

Always heat fat slowly, and watch as it heats.

. Use a deep fat thermometer whenever possible to prevent overheating fat beyond the smoking point.

Never try to move a pan of hot fat, especially a deep fat fryer. Wait until the fat is cool,

Never Ieave jars or cans of fat drippings on or

near your range.

Never clean the cooktop surface when it is hot. Some cleaners produce noxious fumes and wet cloths could cause steam bums if used on a hot surface.

Use proper pan size-Avoid pans that are unstable or easily tipped. Select cookware having flat bottoms large enough to cover burner grates. To avoid spillovers, make sure cookware is large enough to contain the food properly. This will both save cleaning time and prevent hazardous accumulations of food, since heavy spattering or

-spillovers left on range can ignite. Use pans with Iandles that can be easily grasped and remain cool.

When using glass cookware, make sure it is designed for top-of-range cooking.

Keep all plastics away from the top burners.

Do not leave plastic

items on the cooktop—

they may melt if left too close to the vent.

Do not leave any items on the cooktop. The

hot air from the vent may ignite flammable items and will increase pressure in closed containers, which may cause them to burst.

To avoid the possibility of a burn, always be certain that the controls for all burners are at the off position and all grates are cool before attempting to remove them.

When flaming foods are under the hood,

turn the fan off. The fan, if operating, may spread the flames.

If the range is located near a window, do not

hang long curtains that could blow over the top burners and create a fire hazard.

If you smell gas, turn off the gas to the range and call a qualified service technician. Never use an open flame to locate a leak.

Baking, Broiling and Roasting

Do not use the oven for a storage area.

Items stored in the oven can ignite.

Stand away from the range when opening the

door of a hot oven. The hot air and steam that escapes can cause burns to hands, face and eyes.

Keep the oven free from grease buildup.

Place the oven shelf in the desired position while the oven is cool.

Pulling out the shelf to the shelf-stop is a

convenience in lifting heavy foods. It is also a precaution against bums from touching hot surfaces of the door or oven walls.

*Do not heat unopened food containers in the oven. Pressure could build up and the container

could burst, causing an injury.

Do not use aluminum foil anywhere in the oven

except as described in this guide. Misuse could result in a fire hazard or damage to the range.

(continued next page)

5

Page 5
Image 5
GE 164D2966P053, JGSC12 operating instructions Baking, Broiling and Roasting, Over the burner grate to support the wok. This

164D2966P053, JGSC12 specifications

The GE JGSC12,164D2966P053 is a state-of-the-art industrial generator set specifically designed to meet modern energy demands. Renowned for its robust performance and reliability, this generator set is a prime choice for various applications, including backup power for commercial buildings, industrial facilities, and critical infrastructure.

One of the standout features of the GE JGSC12 is its advanced power generation technology. It utilizes a high-efficiency diesel engine that is engineered for optimal fuel consumption while delivering an impressive output. This ensures that users experience lower operating costs and reduced carbon emissions, aligning with global sustainability initiatives.

The generator set is equipped with an integrated digital control system that enhances both monitoring and operational efficiency. This sophisticated system allows for real-time tracking of performance metrics, making it easier for operators to manage the generator and perform necessary maintenance. Safety features, including overload protection and automatic shutdown mechanisms, are built into the control system, ensuring that users can operate the generator with confidence.

Another notable characteristic of the GE JGSC12 is its modular design. This allows for easier transport and installation, making it suitable for a variety of applications, from construction sites to remote locations. The compact footprint ensures that it can fit into tight spaces without compromising on power output.

Additionally, the generator set's sound attenuation capabilities make it one of the quieter options on the market. This is particularly important for urban environments where noise pollution is a concern. The carefully engineered noise reduction features ensure that the generator operates without disturbing the surrounding community.

Furthermore, the GE JGSC12 has been tested for rugged reliability in extreme conditions. Whether faced with high temperatures or inclement weather, this generator set is built to withstand the elements, providing uninterrupted power when it is needed most.

In summary, the GE JGSC12,164D2966P053 is a powerful, efficient, and reliable generator set that incorporates cutting-edge technologies and features. With its sophisticated control system, modular design, and environmental considerations, it stands out as an excellent solution for a wide range of power generation needs in various sectors.