Instructions

Care and cleaning of the oven.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Instructions Safety

Lift the door straight up and off the hinges.

Lift-Off Oven Door (on some models)

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door, open it to the broil stop position. Grasp firmly on each side and lift the door straight up and off the hinges.

Do not place hands between the hinge and the oven door frame.

To replace the door, make sure the hinges are in the broil stop position. Position the slots in the bottom of the door squarely over the hinges and slowly lower it over both hinges.

Lift-Off Oven Door (on some models)

Tips Care and Cleaning Operating

Slot

Hinge arm

Hinge lock (unlocked position)

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Pull the hinge locks down toward the door frame, to the unlocked position. This may require a tool.

Firmly grasp both sides of the door at the top.

Close door to the door removal position, which is halfway between the broil stop position and fully closed.

Lift door up and out until the hinge arm is clear of the slot.

To replace the door:

Firmly grasp both sides of the door at the top.

With the

Bottom

Hinge arm

door at the

edge

 

same angle as

of slot

 

the removal

 

 

position, seat the

 

indentation of

 

 

the hinge arm

 

Indentation

into the bottom

 

edge of the hinge slot. The notch in

the hinge arm must be fully seated

into the bottom of the slot.

 

Fully open the door.

Push the hinge locks up against the front frame of the oven cavity, to the locked position.

Locked position

Sealed hinge arm

Removal position

Close the oven door.

Consumer Support Troubleshooting

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

24

To clean the inside of the door:

Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

The area outside the gasket and the door liner can be cleaned with a soap-filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass

on the outside of the door. Do not let water drip into the vent openings.

If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Page 24
Image 24
GE JKP56 Lift-Off Oven Door on some models, To remove the door, To replace the door, To clean the inside of the door

JTP56, JTP18, JKP18, JKP56 specifications

The GE JKP56, JKP18, JTP56, and JTP18 are innovative commercial kitchen appliances designed to meet the demands of foodservice operations. Each model is thoughtfully engineered to enhance cooking efficiency, provide exceptional cooking results, and facilitate ease of use in bustling kitchen environments.

The GE JKP56 is a versatile oven that boasts a full-width baking element, enabling uniform heat distribution and consistent baking results. One of the standout features of the JKP56 is its self-cleaning option, which simplifies maintenance and ensures that the appliance remains in optimal condition. Additionally, the JKP56 is equipped with an electronic control system, allowing users to easily adjust cooking settings with precision. Its spacious interior and adjustable racks make it suitable for large-scale food preparation, accommodating various baking needs.

In contrast, the GE JKP18 offers a compact design without compromising on functionality. This model is ideal for kitchens with limited space, yet it still provides an impressive cooking capacity. The JKP18 features a unique window and interior light, providing visibility into the cooking process without the need to open the door. Moreover, the model's durable construction promises longevity, making it a reliable choice for restaurants and cafes consistently preparing meals.

The GE JTP56 and JTP18 are part of GE's convection oven lineup and represent cutting-edge technology. The JTP56 is distinguished by its heavy-duty construction and high-performance convection system, which circulates hot air for even cooking. This feature is particularly advantageous for baking and roasting, ensuring food is cooked to perfection. The JTP56 also includes programmable cooking modes and a user-friendly touch control panel, streamlining operations for busy chefs.

Meanwhile, the JTP18 brings similar convection technology in a more compact form. This model is designed for smaller establishments but still boasts impressive performance features. The efficient airflow design enhances cooking efficiency, while the easy-to-use interface simplifies the user's experience. Both JTP models incorporate energy-efficient technologies, reducing operational costs without sacrificing performance.

In summary, the GE JKP56, JKP18, JTP56, and JTP18 are exceptional kitchen appliances that exemplify versatility, efficiency, and durability. These models are equipped with advanced technologies and user-friendly features, making them suitable for various foodservice applications. Whether a large commercial kitchen or a quaint bistro, GE's offerings provide solutions that cater to diverse culinary needs.