27
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Oven Light Bulbs

(on some models)

NOTE: The glass cover (on some

models) should be removed only when

cold. Wearing latex gloves may offer a

better grip.

CAUTION

: Before replacing your

oven light bulb, disconnect the electrical

power to the oven at the main fuse or

circuit breaker panel.

Be sure to let the light cover and bulb
cool completely.
For your safety, do not touch a hot bulb
with bare hands or a damp cloth.
To remove:
Turn the glass cover
counterclockwise 1/4 turn until the
tabs of the glass cover clear the
grooves of the socket.
Using gloves or a dry cloth, remove
the bulb by pulling it straight out.
To replace:
Use a new 130-volt Halogen bulb,
not to exceed 50 watts.
Using gloves or a dry cloth, remove
the bulb from its packaging. Do not
touch the bulb with bare fingers.
Push the bulb straight into the
receptacle all the way.
Place the tabs of the glass cover into
the grooves of the socket. Turn the
glass cover clockwise 1/4 turn.
For improved lighting inside the
oven, clean the glass cover
frequently using a wet cloth. This
should be done when the oven is
completely cool.
Reconnect electrical power to
the oven.
Bulb
Socket
Tab
Glass cover
www.GEAppliances.com
Receptacle
Use gloves
or cloth
Receptacle