Installation Instructions
Pre-Installation Checklist
Remove packaging materials. Check inside microwave, behind hinges and under false bottom. Remove labels on the outside of the door, plastic on trims and panel, all tape around the oven and any shipping screws securing the oven to the base pad.
Door removal is not a requirement for installation of the product, but is an added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge | Hinge | |
locks down toward | Unlocked | |
Position | ||
the door frame, | Hinge | |
to the unlocked | Slot | |
position. This may |
| |
require a flat blade | Hinge | |
screwdriver. | ||
Arm |
DO NOT LIFT THE DOOR
BY THE HANDLE!
Oven Racks
EASY
EASY INSTALLATIONINSTALLATION30"OF YOUR NEW
30" WALLWALLOVENOF YOUR OVEN NEW
Literature
Pack
Open oven door and remove literature pack and oven racks. Open microwave door and remove shelves and turntable package.
Remove Installation Instructions from literature pack and read them carefully before you begin.
Be sure to place all literature, Owner’s Manual, Installations, etc. in a safe place for future reference.
Place hands on both sides of 
the door, and close the oven 
door to the removal position, 
which is most of the way closed. 
Lift door up and out until the hinge arms clear the slots.
Hinge Clears Slot
NOTE: The oven door is very heavy.
Be sure you have a firm grip before lifting the oven door off the hinges. Use caution once the door is removed. Do not lay the door on its handle. This could cause dents or scratches.
Place the oven on a table or platform even with the cutout opening. (Platform must support 255 lbs. [115 Kg].)
Remove the bottom trim from the top
of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top of the unit.
3
