GE JKS1027 Instructions Safety, Care and Cleaning Operating, Tones at the End of a Timed Cycle

Models: JKS1027

1 48
Download 48 pages 41.5 Kb
Page 12
Image 12
Instructions Safety

Instructions

Special features of your oven control.

Instructions Safety

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6 second beep may be canceled.

To cancel the 6 second beep:

Press the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.

Press the Kitchen Timer On/Off pad. The display shows CON BEEP (continuous beep). Press the Kitchen Timer On/Off pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the Start pad.

Care and Cleaning Operating

12 Hour, 24 Hour or Clock Black-OutYour control is set to use a 12 hour clock.

If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below.

Press the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.

Press the Clock pad once. The display will show 12 hr. If this is the choice you want, press the Start pad.

Press the Clock pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, press the Start pad.

Press the Clock pad again to black- out the clock display. The display will show OFF. If this is the choice you want, press the Start pad.

NOTE: If the clock is in the black-out mode, you will not be able to use the Delay Start function.

Consumer Support Troubleshooting Tips

Changing the Speed of the + or – Pads

As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below.

Press the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.

or

Press any + pad. The display will

 

show you a set speed between 1

 

and 5.

Press any + pad to increase the speed up to the number 5.

Press any pad to decrease the speed down to the number 1.

Press Start to activate the setting and leave the control set in this special features mode.

12

Page 12
Image 12
GE JKS1027 owner manual Instructions Safety, Care and Cleaning Operating, Tones at the End of a Timed Cycle