Care and cleaning of the cooktop. | www.GEAppliances.com |
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Safety
How to Remove Packaging Tape
To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape, cooktop labels on the new appliances
is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Instructions Operating
Molded rib
Stem
Spring
clip
Clear groove
Control Knobs
The control knobs may be removed for easier cleaning.
Before removing the knobs for cleaning, please note that the knobs are in the OFF position. When replacing the knobs, check the OFF position to ensure proper placement.
Wash knobs in soap and water but do not soak. Avoid getting water down into the knob stem holes.
The stem has a groove in each side. The groove on one side has a spring clip. The other groove is clear. Check the inside of the knob and find the molded rib.
Replace the knob by fitting the molded rib inside the knob into the clear groove on the stem.
Instructions Care and Cleaning Troubleshooting Tips Consumer Support
9
