GE Monogram ZET1038 Self-Cleaning Oven, Before a clean cycle, How to set the oven for cleaning

Models: ZET1038 ZET1058

1 36
Download 36 pages 54.23 Kb
Page 27
Image 27
Self-Cleaning Oven

Self-Cleaning Oven

Wall Oven

Before a clean cycle

The oven must be completely cool in order to set the self-clean cycle.

We recommend venting with an open window or using a ventilation fan or hood during the first self-clean cycle.

Clean soil from the frame around the oven door and outside the door gasket. These areas must be cleaned by hand.

Do not clean the door gasket by hand as this could damage it.

Wipe up excess grease and other food spills with a damp cloth. This will minimize the amount of smoke created during self-cleaning.

Remove all cookware, broiler pan, grid and any aluminum foil from the oven.

The oven racks may be left in the oven during the self-clean cycle.

Make sure the oven light lens and lens frame are in place.

Do not use commercial oven cleaners or oven protectors in or near the self-cleaning oven.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room.

How to set the oven for cleaning

CLOCK

COOK

NORMAL

OFF

 

 

OFF

 

SELF

CONVECTION

 

 

 

 

TIME

 

 

WARM

CLEAN

ROAST

 

 

TIMED

 

 

 

 

 

 

 

 

 

 

SET

OVEN ON

CLEAN

200

BROIL

CONVECTION

 

 

BAKE

 

 

 

 

 

 

 

 

 

BROIL

250

 

 

 

START

HEATING

500

 

BAKE

CONVECTION

 

 

300

TIMER

TIME

 

450

 

BROIL

 

 

 

400

350

 

PROOF

 

 

Mode Selector Knob

Temperature Control

Oven Control Knob

 

 

 

Knob

 

 

Single oven controls shown set for cleaning.

You can set the oven to turn on immediately, clean for a selected length of time and turn off

automatically. On double oven models, you will not be able to set a timed cooking or cleaning function in both ovens at the same time.

NOTE: Before beginning, make sure the clock shows the correct time of day.

Before a clean cycle Turn the Mode Selector Knob to TIMED (on double oven models, select UPPER TIMED or LOWER TIMED, depending on the oven you are cleaning).

How to set the oven for cleaning Turn the Oven Control Knob to SELF CLEAN.

Manual background Turn the Temperature Control Knob to CLEAN.

Clean time is normally 3 hours. You can change the clean time to any time between

2 and 4 hours, depending on the amount of soil in your oven.

If your oven is connected to a 208V electrical supply, we recommend that you set your clean time for 4 hours.

Manual background Press the COOK TIME button if a time other than 3 hours is needed.

Manual background Press the increase “” or decrease “” button to set the cleaning time.

If the increase “” or decrease “” button is not pressed within 5 seconds of pressing the COOK TIME button, you will need to press COOK TIME again.

The display will show CLEAN and the clean time remaining.

As the oven heats to the clean temperature, the door will lock automatically. The locked door, HEATING and the oven OVEN ON indicator lights turn on.

Manual background After the clean cycle is complete, the oven has cooled and the locked door indicator light is off, turn the Oven Control Knobs to OFF and the Mode Selector Knob

to NORMAL.

27

Page 27
Image 27
GE Monogram ZET1038, ZET1058 owner manual Self-Cleaning Oven, Before a clean cycle, How to set the oven for cleaning