GE Monogram ZET1038, ZET1058 owner manual Clock and Timer, Using the clock and timer

Models: ZET1038 ZET1058

1 36
Download 36 pages 54.23 Kb
Page 11
Image 11
Clock and Timer

Clock and Timer

Wall Oven

Double oven clock and timer (Pro style knob shown)

Single oven clock and timer (Euro style knob shown)

Using the clock and timer

When you first turn on the power to your oven, or after a power failure, the display will show all 8’s, then dashes and the set clock symbol.

To set or change the time of day, press the CLOCK button. The control will beep. The set clock symbol will appear in the display.

Press the increase “” or decrease “” button.

If the increase “” or decrease “” button is pressed and released, it will change the time in one minute increments. If the increase “” or decrease “” button is pressed and held, the time will change in 10 minute increments.

Once the clock is set, press the CLOCK button again. The control will beep and the set clock symbol will disappear.

To check the time of day when the timer is in use, press the CLOCK button. The time of day will be displayed briefly and then will return to the timer function.

The timer button does not control oven functions. The timer may be used as a convenient kitchen timer.

To set, press the TIMER button. The control will beep. The display will show “:00” and the words SET TIMER.

Press the increase “” or decrease “” button to set the amount of time desired.

If the increase “” or decrease “” button is pressed and released, it will change the time in one minute increments. If the increase “” or decrease “” button is pressed and held, the time will change in 10 minute increments.

The timer will start automatically. The colon blinks when the timer starts counting down. The word TIMER will remain in the display during the countdown. The timer will count down in minutes until the last minute, then it will count down in seconds.

When timing is complete, the word TIMER will blink and the control will beep three times. The display will return to the time of day or any active programmed function and the control will beep twice every 10 seconds until any button is touched.

To cancel the timer, press the TIMER button once. If no time is set, the timer cancels itself after approximately 5 seconds. The time of day is then displayed.

11

Page 11
Image 11
GE Monogram ZET1038, ZET1058 owner manual Clock and Timer, Using the clock and timer