Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

OVEN

Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

and Cleaning Operating Instructions

Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

Keep the oven vent unobstructed.

Keep the oven free from grease buildup.

Place the oven shelf in the desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

Pulling out the shelf to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

Do not use the oven to dry newspapers. If overheated, they can catch on fire.

Do not use the oven for a storage area. Items stored in an oven can ignite.

Do not leave paper products, cooking utensils or food in the oven when not in use.

Do not use aluminum foil to line oven bottoms, except as suggested in this manual. Improper installation of aluminum foil may result in a risk of electric shock or fire.

Tips Care

SELF-CLEANING OVEN

Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

Troubleshooting

Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

Before self-cleaning the oven, remove the broiler pan, grid and other cookware.

Be sure to wipe up excess spillage before starting the self-cleaning operation.

If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

Clean only parts listed in this Owner’s Manual.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

6

Page 6
Image 6
GE JRP80 owner manual Tips Care, Troubleshooting, Consumer Support

JRP80 specifications

The GE JRP80 is a sophisticated jet engine developed by General Electric for a variety of regional and short-haul aircraft. Designed to combine efficiency, reliability, and performance, it has become a significant player in the aerospace industry, meeting the demands of modern aviation.

One of the main features of the JRP80 is its high bypass ratio. This design allows for increased thrust while maintaining reduced fuel consumption, making it particularly suitable for regional aircraft that operate on shorter routes. The engine’s advanced aerodynamics play a crucial role in improving overall efficiency, contributing to lower operational costs for airlines.

The GE JRP80 employs state-of-the-art materials and manufacturing techniques. The use of composite materials in the fan blades and other components reduces weight and enhances performance. This weight saving is critical in the aviation industry where fuel efficiency dictates operational viability. Furthermore, advanced alloys used in the turbine section enable the engine to withstand extreme temperatures, thereby improving its durability and maintenance intervals.

Another notable technological feature of the JRP80 is its digital engine control system. This system allows for real-time monitoring and adjustments to engine performance, ensuring optimal efficiency under various operating conditions. The digital controls enable predictive maintenance, which aids airlines in planning maintenance schedules proactively, reducing downtime and costs.

The JRP80 also incorporates a noise reduction technology, addressing environmental concerns within the aviation sector. The engine design minimizes noise levels, making it compliant with stringent regulations and improving the passenger experience.

Moreover, the engine is designed with modular components, simplifying maintenance and reducing the turnaround time for repairs. This modularity is a significant benefit for airlines operating on tight schedules, as it minimizes unexpected disruptions in service.

In summary, the GE JRP80 is a blend of advanced technology, high efficiency, and environmental responsibility. With its innovative features such as a high bypass ratio, lightweight construction, digital control systems, and noise reduction capabilities, the JRP80 offers airlines a competitive advantage in the rapidly evolving aviation market. As regional travel continues to grow, the JRP80 is poised to play a vital role in the fleet of many airlines around the world, combining performance with economic viability.