GE JS905 installation instructions Installation, Instructions, Before You Begin, Parts Included

Installation	Self-Cleaning Radiant
Instructions	Electric Slide-In Range
	JSP42, JS968, JS900, JS905, JSP46

If you have questions, call 1.800.GE.CARES or visit our website at: ge.com

Before You Begin	• Note to Installer—Be sure to leave these
	instructions with the consumer.
Read these instructions carefully and completely.	• Note to Consumer—Keep these
• IMPORTANT—Save these	instructions for future reference.
instructions for local inspector’s use.	• Proper installation is the responsibility
• IMPORTANT—Observe all	of the installer and product failure due
	to improper installation is NOT covered
governing codes and ordinances.	under warranty.
	• NOTE—This appliance must be properly
	grounded.

PARTS INCLUDED
Rear Filler	Screws	Anti-Tip Bracket
2 Screws

MATERIALS YOU MAY NEED

Tin Snips Lag Bolts Anchor Sleeves

(For Anti-Tip Bracket Mounted

on Concrete Floors Only)

(UL Approved 40 or 50 AMP) Squeeze Connector

4-Wire Cord OR	3-Wire Cord	(For Conduit
		Installations Only)
4’long	4’long

TOOLS YOU WILL NEED

1/8” Drill Bit and	Wrench or Pliers
Electric or Hand Drill	(for 1-7/16”Nut)

Level

1/4” Nut Driver

Tape Measure Pliers

Pencil

Straight Edge or Square

Safety Glasses

Hand or Sabre Saw

31-10621-3 09-08 JR 1