Installation Instructions
Standard Installation
2STANDARD INSTALLATION
1/4” Min.
Flat
9/16” Min.
Flat
Smooth Cut
Wall
| Flat |
25” | Area |
Typically | R |
|
9/16” Min.
Flat
36”
1/4”
If the construction of your cabinet cannot provide a 1/4” flat area at the back of the countertop opening, consider changing the countertop to accommodate this dimension. See Alternate Construction section. If the area is not flat, excess tension may be applied to the glass cooktop, causing breakage and voiding the warranty.
A
B
C
D
Center the 30” wide opening over the adjacent cabinets and mark with a straight edge.
Using a straight edge, mark the back line at
Be careful not to damage the adjacent cabinets while cutting the countertop. Use a hand or saber saw to make straight smooth cuts.
Remove countertop raised edge, if incorporated. (See illustration on page 5)
6