Installation Instructions
Pre-Installation Checklist
Inspect Installation Location
Refer to alternate construction section for the following
a.Counter opening extends to the wall:
Maintop Filler (supplied with the range.) (See page 15, section AA, for Installation Instructions) or
Backguard (Kit JXS36XX or JXS39SS). See page 15.
b.Counter height greater than
Lower Trim
c.One side is not enclosed by a cabinet:
Bodyside (Kit JXS76XX).
d.Island Installation:
To provide an optimum installation, the top surface of the countertop must be level and flat (lie on the same plane) around the 3 sides that are adjacent to range cooktop. Proper adjustments to make the top flat should be made or gaps between the countertop and range cooktop may occur. Forcing the cooktop to fit may cause excessive gaps and could break the glass and void the warranty.
To obtain Kits:
a. Visit GE Web Site (See page 1)
b. Call GE Answer Center (See page 1) c. Contact Dealer
Move range indoors in front of cabinet opening.
(Do not use hand trucks when moving the unpackaged range. Cooktop glass may be broken.)
Protect the kitchen floor! Flatten and place a piece of the shipping carton in front of the installation location to protect the flooring.
Do not remove the protective channel from the sides of the glass cooktop, if applicable, until later in the installation.
Protective
Channel
ADJUST
Carefully, tilt the range to access the range leveling legs. Use an adjustable wrench to screw leveling legs out so that glass support flanges clear top of countertop.
3 | (Continued on following page) |
