GE JVM230BL, JVM231WL, JVM231BL CAm Am CLEA~G, How to Clean the Inside, How to Clean the Outiide

CAm Am CLEA~G

Keep your oven clean and sweet- smelling. Opening the oven door a few minutes after cooking helps air out tie inside. An occasional thorough wiping with a solution of baking soda and water keeps the inside fresh.

Don’t use sharp-edged utensils on your oven. The inside and outside oven walls can be scratched. The control panel can be damaged.

BE CERTA~ POWER IS OFF BEFORE CLEANING ANY PART OF THIS O~N.

How to Clean the Inside

Walls and floor. Some spatters can be removed with a paper towel, others may require a damp cloth. Remove greasy spatters with a sudsy cloth, then rinse with a damp cloth. Do not use abrasive cleaners on oven walls. NEVER USE A COMMERCIAL OVEN CLEANER ON ANY PART OF YOUR MICROWAVE OVEN.

Door (inside). Window: Wipe up spatters daily and wash when soiled with a damp cloth. Rinse thoroughly and dry.

Metal and plastic parts on door: Wipe frequently with a damp cloth to remove all soil. DO NOT USE ABRASIVES, SUCH AS CLEANING POWDERS OR STEEL AND PLASTIC PADS. THEY W~L DAMAGE THE SURFACE.

How to Clean the Outiide

Case. Clean the outside of your oven with soap and damp cloth, rinse with a damp cloth and then dry. Wipe the window clean with a damp cloth. Chrome trim is best wiped with a damp cloth and then with a dry towel.

Control Panel. Wipe with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasives or sharp objects on the panel—they can damage it.

Special note when using Brown ‘N Sear Dish: If grease is present, high heat generated on bottom of a Brown ‘N Sear dish may cause the grease to bum onto the oven tray. This may be removed with a cleanser such as Bon Ami@ brand cleanser.

After using Bon Ami@ brand cleanser, rinse and dry

thoroughl following instmctions on can. Do not use

.J’

Bon Aml brand cleanser on the painted surfaces such as the walls. It may scratch the paint.

Door Surface. When cleaning surfaces of door and oven that come together on closing the door, use only mild, non-abrasive soaps or detergents applied with a sponge or soft cloth.

Power Cord. If the cord becomes soiled, unplug and wash with a damp cloth. For stubborn spots, sudsy water may be used, but be certain to rinse with a damp cloth and dry thoroughly before plugging cord into outlet.

22