GE JVM231WL, JVM231BL Gro-~G ~Structions, To Remove Charcoal Filter, To Install Charcoal Filter

To Remove Charcoal Filter

To remove the charcoal filter, disconnect power at main fuse or circuit breaker panel or pull plug. Remove the top grille by taking off

2 screws which hold it in place. Grasp filter and slide toward front of oven. It will slide right out.

To Install Charcoal Filter

To install a new filter, remove plastic and other outer wrapping from the new filter. Insert filter into top opening of oven as shown.-It will rest at

an angle on 2 side support tabs and in front of right rear tab. Replace grill and secure with 2 screws.

GRO-~G ~STRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. (Fig. 1)

WARNING–Improperuseofthe grounding plug can result in a risk of electric shock.

Consult a qualified electrician or service technician if the grounding instructions are

not completely	Fig. 1	Ensure proper ground
understood, or if		exists before use
		I
doubt exists as to v	hether the au~liance is
		. .

properly grounded.

Where a standard 2-prong wall receptacle is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall receptacle.

Do not under any circumstance cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug with this appliance. Do not use an extension cord with this appliance.

25