![Instructions Operating Instructions](/images/new-backgrounds/80902/8090253x1.webp)
GEAppliances.com
The oven doors must be closed and all controls set correctly for the cycle to work properly.
Safety
How to Delay the Start of Cleaning
Touch the SELF CLEAN HI/LO pad once for a
A
If a time other than 5 hours or
3 hours is needed, use the number pads and enter the desired clean time.
You can change the clean time to
any time between 3 hours and 5 hours, depending on how dirty your oven is.
Touch the DELAY START pad.
Using the number pads, enter the time of day you want the clean cycle to start.
Touch the START pad.
The upper and lower oven doors lock automatically. The cooktop elements are also locked out during
When LOCKED goes off, you will be able to open the doors.
Instructions Operating Instructions
After a Clean Cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■You cannot set the oven for cooking or another
■While the oven is
■If the racks become hard to slide, apply a small amount of cooking oil to a paper towel and wipe the edges of the oven racks with the paper towel.
Care and Cleaning Troubleshooting Tips Consumer Support
27