Care and cleaning of the range. | GEAppliances.com |
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
WARNING: If your range is removed for cleaning, servicing or any reason, be sure the
How to Remove Protective Shipping Film and Packaging Tape
Safety Instructions
Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film.
Remove all of the film before using the appliance for the first time.
To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Operating Instructions
Control Knobs
The control knobs may be removed for easier cleaning.
Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.
The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the inside of the knobs are dry before replacing.
Replace the knobs in the OFF position to ensure proper placement.
Care and Cleaning
Oven Vent
The lower oven vent is located above the right rear surface unit. The upper oven vent is located above the left rear surface unit.
These areas could become hot during oven use.
It is normal for steam to come out of the vent.
The vent is important for proper air circulation. Never block this vent.
Troubleshooting
Control Panel
If desired, the touch pads may be deactivated before cleaning.
See the Control Lock information in the Using the clock, kitchen timer and control lock section in this manual.
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm soapy water. Do not use abrasives of any kind.
Reactivate the touch pads after cleaning.
Tips Consumer Support
31
