![](/images/new-backgrounds/1135159/13515957x1.webp)
Installation Instructions
KIT CONTENTS (GE KIT #GE24STACK)
Screws (4)
Rubber pads (4)
Bracket- stack (R)
Bracket- stack (L)
TOOLS YOU WILL NEED
❒ Phillips screwdriver
❒ Gloves
❒Level
INSTALLING THE STACK
BRACKET KIT
1REMOVE THE DRYER LEVELING LEGS
A.Carefully lay the dryer on its side. Use the packing material so you don’t scratch the finish on the dryer.
B.Remove the dryer leveling legs.
Unscrew and remove all 4 leveling legs
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay the dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location.
2INSTALL RUBBER PADS TO DRYER BASE
A.Locate the 4 rubber pads in the parts package. Insert rubber pads into the leveling leg holes.
B.Set the dryer upright .
29