Loading the dishwasher racks.
For best dishwoshing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from gout model.
Upper Rack
Although the upper rack is primarily for glasses,cups and saucers, pots and pans can be placed in this rack for effective cleaning. Cupsand glassesfit best along the sides.This is also a secure place for dishwasher plastics.
The utility shelf (somemodels)may be placed in the up or down position to add flexibility. A wine glass holder (some models)secures wine glassesfor best washability.
Some models have contoured metal cup
shelvesthat can secure up to 12 wine glasses (asshown).
Becausewine glassescome in various sizes, after loading, slowly push in the rack to make sure they will clear the top of the dishwasher.
Some models have an Angled Back System, which allows you to angle your dishes,such as coffee mugs, for better cleaning and quicker drying. To position the tines, pull the lever forward then drop the tines into position, then releasethe lever.
The upper rack is good for all kindsof
provide flexibility for
Secure larger
Make sure small plastic items are secure so they can'tfall onto the heater.
Be sure that items do not protrude through the bottom of the rack and block rotation of
the middle spray arm. This could result in poor wash performance for items in the upper rack.
Checkto make sure that no items will block rotation of the wash arm.
NOTE:The Single RackWash selection,on models with this feature, washes the upper rack only. If you use this feature, do not load items in the lower rack.
Adjustable Upper Rack
The standard position of your adjustable rack is "up" which allows for maximum clearance for your taller items in the lower rack. If you have taller wine glasses,tumblers or other items to place in the upper rack, you may want to adjust the rack to the lower position.
To lower the reck, support the weight of the rack with your hands as shown and press both finger pads about 1/4" toward the inside of the rack as indicated and guide the rack down to its lower position.
To raise the rack to the "up" position, pull up on the center of the rack side frame until the
I II II II II II II II II II II | rack locks into place. |
|
12