AXIS 216FD - Accessing the Camera 11

Adjusting the image

Image

Focus

balance

puller

Zoom puller

ring

Tilt

Tilt

adjustment

adjustment

screw

screw

 

Locking screw

1.Open the Live View page in the Web interface and make the following adjustments on the camera:

2.Loosen the locking screw and tilt adjustment screws.

3.Turn the lens to the desired position.

4.Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the camera’s position.

5.Turn the image balance ring to set the horizontal position.

6.Open the Focus Adjustment page in the Web interface under Basic Configuration > Focus and follow the on-screen instructions. Use the image window to adjust the focus and zoom.

To set the focus and zoom, loosen the zoom and focus pullers counterclockwise and rotate the rings.

Lock the focus and zoom pullers in position by rotating the screws clockwise.

Page 11
Image 11
Axis Communications 216FD user manual Adjusting the image, Adjustment