Audio Settings, Enable Audio | Axis Communications 216FD instruction

AXIS 216FD - Audio 21

Audio

The AXIS 216FD can transmit audio to other clients using either the built-in microphone or a connected external microphone and can play audio received from other clients via a connected speaker.

Note: The speaker connected to the audio output must have a built-in amplifier, e.g. PC speakers.

Client PC	Internal
	microphone
	TCP/IP Network

Internal microphone

An example of a network using AXIS 216FD cameras to transmit audio and video across the network.

Audio Settings

This section describes how to configure the basic audio settings for the AXIS 216FD, e.g. set the communication mode and adjust the sound levels in the microphone and speaker connected to the camera.

Enable Audio

Check this box to enable audio in the AXIS 216FD.

Image 21

Axis Communications 216FD user manual Audio Settings, Enable Audio, Microphone, Internal microphone

Contents

Axis 216FD Fixed Dome Network Camera User’s Manual About this Document Support Contents Axis 216FD Key features Product Features Overview LED indicators Terminal connectorWith a maximum load of 50mA and a maximum voltage DC, this output has an open-collector NPN transistor with Access from a browser Accessing the Camera Accessing the camera from the Internet Setting the Password Adjustment Adjusting the image Live View AMC audio controls Video Streams How to stream MPEG-4 Motion Jpeg MPEG-4 clientsAxis Media Control AMC QuickTime & Real Player Alternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Image Appearance Video and Image settings Advanced Camera Settings Text Overlay SettingsVideo Stream Overlay/Mask Advanced MPEG-4 Settings GOV Settings Low Light BehaviorBit Rate Control Enable Audio Audio SettingsAudio Microphone Audio mode Audio ChannelsAudio Input Audio Output Layout Live View Config Customizing the default Upload Own Web FilesOwn Home Default Viewer Default Video FormatAction Buttons Output Buttons AMC Settings Sequence ModeHtml Examples External Video Event Configuration Event ServersDefinitions How to set up a triggered event Configuring Event TypesTriggered Event Click Add triggered on the Event types Scheduled Event Pre-trigger and Post-trigger buffers Motion Detection Object Size Port Status Security System OptionsIP Address Filtering Referrals Https Date & Time Network Advanced TCP/IP Settings Network Basic TCP/IP SettingsIP Address Configuration Services Host Name Configuration NTP ConfigurationLink-Local Address NAT traversal port mapping WAN internet Smtp email UPnPNetwork Traffic LED Settings MaintenancePorts & Devices Support Configuration Resetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Terminal connectorPinout and Interface Terminal Connectors Basic Configuration TroubleshootingChecking the Firmware Upgrading the Firmware Axis Support Emergency Recovery Procedure Browser Camera is accessible locally, but not externally Camera is inaccessible Power indicator is not constantly litDecode only I frames Are flashing red rapidly Audio volume too low/high Problems uploading filesIs enabled under System Options Date & Time No audio Lens Technical Specifications Clock Approvals General performance considerations Optimizing your system Bandwidth Frame rates Motion Jpeg and MPEG-4 Compression See Image Compression Glossary of Terms Half-duplex See Full-duplex Allowed to enter Megapixel See Pixel VOP See VOP Axis 216FD Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network AMC Index Snmp Axis 216FD Index