Before you call for service…ge.com
Troubleshooting Tips
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem |
| Possible Causes | What To Do |
|
|
|
|
Surface elements will not |
| Improper cookware | • Use pans which are absolutely flat and match |
maintain a rolling boil |
| being used. | the diameter of the surface element selected. |
or cooking is slow |
|
|
|
|
|
|
|
Surface elements do |
| Cooktop controls | • Check to see the correct control is set for the surface |
not work properly |
| improperly set. | element you are using. |
|
|
|
|
Scratches on cooktop |
| Incorrect cleaning methods | • Use recommended cleaning procedures. See the |
glass surface |
| being used. | Cleaning the glass cooktop section. |
|
|
|
|
|
| Cookware with rough bottoms | • To avoid scratches, use the recommended cleaning |
|
| being used or coarse particles | procedures. Make sure bottoms of cookware are clean |
|
| (salt or sand) were between | before use, and use cookware with smooth bottoms. |
|
| the cookware and the surface |
|
|
| of the cooktop. |
|
|
| Cookware has been slid |
|
|
| across the cooktop surface. |
|
|
|
|
|
Areas of discoloration |
| Food spillovers not cleaned | • See the Cleaning the glass cooktop section. |
on the cooktop |
| before next use. |
|
|
|
|
|
|
| Hot surface on a model | • This is normal. The surface may appear discolored |
|
| with a | when it is hot. This is temporary and will disappear |
|
| cooktop. | as the glass cools. |
|
|
|
|
Plastic melted to |
| Hot cooktop came into | • See the Glass surface – potential for permanent damage |
the surface |
| contact with plastic placed | section in the Cleaning the glass cooktop section. |
|
| on the hot cooktop. |
|
|
|
|
|
Pitting (or indentation) |
| Hot sugar mixture spilled | • Call a qualified technician for replacement. |
of the cooktop |
| on the cooktop. |
|
|
|
|
|
Frequent cycling |
| Improper cookware | • Use only flat cookware to minimize cycling. |
off and on of |
| being used. | See the Radiant surface elements section. |
surface elements |
|
|
|
|
|
|
|
Unresponsive keypad |
| Keypad is dirty. | • Clean the keypad. |
|
|
|
|
|
| A fuse in your home may be | • Replace the fuse or reset the circuit breaker. |
|
| blown or the circuit breaker |
|
|
| tripped. |
|
|
|
|
|
15
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support