Replacing the light bulb.

1 2 3

4 5 6

7 8 9

0

Remove screw.

4 5 6

7 8 9

0

Cooktop Light/Nite Light

Replace with a 120 volt, 25 or 50 watt (max.) halogen bulb. Order WB36X10213 from your GE supplier.

1To replace the cooktop light/nite light, first disconnect the power at the main fuse or circuit breaker panel, or pull the plug.

2Remove the screw from the side of the light compartment cover and lower the cover until it stops.

3Be sure the bulb is cool before removing. Break the adhesive seal by gently unscrewing the bulb.

4Screw in the new bulb, then raise the light cover and replace the screw. Connect electrical power to the oven.

About the exhaust feature.

Charcoal filter (on some models).

1 2 3

4 5 6

7 8 9

0

Reusable vent filters

(on all models).

Vent Fan

The vent fan has two metal reusable vent filters.

Models that recirculate air back into the room also use a charcoal filter.

Reusable Vent Filters

The metal filters trap grease released by foods on the cooktop. They also prevent flames from foods on the cooktop from damaging the inside of the oven.

For this reason, the filters must always be in place when the hood is used. The vent filters should be cleaned once a month, or as needed

28

Page 28
Image 28
GE PVM1970 Replacing the light bulb, About the exhaust feature, Cooktop Light/Nite Light, Vent Fan, Reusable Vent Filters