GE QS1800V, QS2800V manual Pull Liquid End Straight Out Figure, Removing Liquid End QS2825V Shown

Pull Liquid End

Straight Out

Figure 6.9

Removing Liquid End

(QS2825V Shown)

Motor Module

Liquid End

Figure 6.10

Liquid End Removal

(QS2825V Shown)

To separate the liquid end from the motor module, simply remove the four bolts joining the two together (Figure 6.8, Liquid End and Motor Module) and carefully pull them apart (Figure 6.10, Liquid End Removal). To rejoin the liquid end to the motor module, use the following pro- cedure: (Figures 6.9 and 6.10 detail the components and assembly).

STEPS

1.Lubricate the O-ring with petroleum or silicone grease

2.Align the splines on the liquid end coupling to the splines on the motor, and join together using the four cap screws and lock washers. Do not over-tighten.

21