Programming.

Program Overview

The programmable thermostat has four periods (MORN, DAY, EVE, NITE) that are customizable for each day of the week. Each period will have a set time, heat temperature and cool temperature. The thermostat monitors the day and time, while maintaining the specific conditions that you have chosen for each period in your program.

Note: Operation being set will blink in the display.

1.Place the Function switch in the

DAY

Off position.

PROG

2.Press the Hold button in for 6 seconds.

3.Press the Hold button 3 times.

DAY (01–07) and PROG is displayed.

4. Press the < or > button to change the day you want to program (01 = Monday, 02 = Tuesday, etc.).

5.Press the Hold button to advance to the next parameter. Note: You can always press the Mode button to return to the

previous parameter.

Period is displayed (MORN, DAY, EVE, NITE).

6. Press the < or > button to change period of day. The display should blink the period of the day.

DAY

PROG

MORN

7.Press the Hold button to advance to the next parameter.

• Set time is displayed.

8. Press the < or > button to adjust hours. Press the Hold button once, and then press the

< or > buttons to adjust minutes.

DAY

PROG

AM

MORN

9.Press the Hold button to advance to the next screen parameter. Note: Transitions required after 11:59 PM must be programmed in the next day’s MORN period.

15

Page 15
Image 15
GE RAK148P1, RAK164P1 installation instructions Programming, Program Overview, Off position