GE RAK164P1, RAK148P1 installation instructions Repeat Programming

Programming.

•Heat temperature is displayed (60°F to 85°F)

10.Press the < or > button to adjust heat set temperature.

DAY

PROG

AM

HEAT

MORN

11.Press the Hold button to advance to the next screen.

•Cool temperature is displayed (60°F to 85°F)

12.Press the < or > button to adjust cool set temperature.

DAY COOL

PROG

AM

MORN

13.Press the Hold button to advance to the next screen.

Repeat steps 1–13 to program each day of the week individually or follow the instructions below to program every day the same as Monday. When programming is complete, slide the Function switch to Heat or Cool to exit Programming Mode.

Repeat Programming

Once the entire Monday (Day 01) schedule is set, the following procedure can be used to copy the Monday schedule for every day of the week.

After the complete Monday schedule is set (see Programming, above), you will be at the “Day” screen:

1. Press the < button once. Day

01 screen displays.

DAY

PROG

2. Press the < button and hold for

2 seconds. The days of the week

stop flashing, locking the settings into memory. Once the schedule is locked in, you can go through each day and make any required changes. This feature speeds up the programming of the standard weekday/weekend schedule.

3. Slide the Function switch to Heat or Cool to exit Programming Mode.

16