![](/images/new-backgrounds/1244222/24422231x1.webp)
94940 Revised Size 10/18/02 12:22 PM Page 16
3.Press and release CODE SEARCH. The INDICATOR LIGHTwill turn off.
4.Starting with 0 on the keypad, press the number buttons in order
5.The number which causes
the INDICATOR LIGHT to blink is the first digit of your code.
6.Repeat Step 4 until you have retrieved all three numbers in the code.
Trouble Shooting
PROBLEMSOLUTION
Red light not blinking when you press any key.
A)Replace the batteries with 2 new AAA alkaline batteries.
B)Check if batteries are properly installed.
The remote does not operate your video devices.
A)Try all the codes listed for your brand. your video devices.
B)Try the Code Search method on Page 12.
Not performing commands properly
Start Code Search over again to locate properlythe proper code for full compati- bility
Problems programming a TV/VCR Combo Unit
Try the VCR code for your brand. Some combo units, however, may require both a TV and VCR code for full operation.
VCR not responding
15
As a safety feature on your remote, you must press the REC button twice.