94940 Revised Size 10/18/02 12:22 PM Page 6
Clearing A Learned Button
To clear a learned button sequence, use the procedure below.
Note: No functions may be stored under the LEARN, SLEEP, CODE SEARCH or any of the device buttons.
1.Press and hold the CODE SEARCH button until the INDICATORLIGHT lights, then release the CODESEARCH
button. | CD |
| AUX |
| CBL/SAT |
|
|
|
|
|
2.Press an release the desired Mode but- ton (TV, VCR, CABLE,SAT, etc. . . ). The INDICATOR LIGHT will blink off once the button press is accepted.
LEARN
3.Press and release the LEARN button twice. The INDICATOR LIGHT will light off once the button press is accepted.
4.Press and release the CODESEARCH button and the remote will return to original operation mode. All learned command functions under the device are now cleared.
Clearing All Learned Buttons
This procedure will erase all learned functions in every device mode. This step is recommended when attempting any learning of a new function from a new remote.
1.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODESEARCH button.
2.Press and release the LEARN button
twice. The INDICATOR LIGHT will |
|
LEARN | |
light off once the button press is accept - |
|
| |
ed. |
|
3.Press and release the CODE SEARCH button and the remote will return to original operation mode. All learned command entries are now cleared.
5
