94940 Revised Size 10/18/02 12:22 PM Page 8
Programming For VCR
Most GE, RCAand ProScan VCRs will not require programming. Check to see if your VCR responds to the remote before you begin programming.
1.Manually turn on the VCR. Find the three digit code for your VCR at the back of the instructions.
2.Press and hold the
CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3.Press and release the VCR button (The INDI- CATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your VCR and press the ON•OFF button. Your VCR should turn off.
NOTE: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on Page 12.
6.With your VCR on, press CHAN+ (CHANNEL UP). If the VCR responds, no further programming is required.
7.Enter your code here for easy reference.
7
