94940 Revised Size 10/18/02 12:22 PM Page 12

Programming For CD

1.Manually turn on the CD player. Find the three digit code for your CD player you wish to control at the back of the instructions.

2.Press and hold the CODESEARCH button

until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

3.Press and release the CD button (The INDICA- TOR LIGHT will blink then remain lit.

4.Enter the code using the Number Buttons. After your

code is entered, the INDI-

CD

CATOR LIGHT will turn

 

off. If the code is not valid,

 

the INDICATOR LIGHT

 

will blink. Check the code

 

list and repeat process.

 

5.Aim the remote at the device you wish to control and press the ON•OFF but- ton. The device should turn off.

6.With your device on, press CHAN+ (Channel Up). If the device responds, no further programming is required.

NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your

brand is not listed, try the Code Search method on Page 12.

7. Enter your code and the

 

CD CODE

 

type of device you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

programmed here for

 

 

 

 

 

 

 

easy reference.

 

 

 

 

 

 

 

11

Page 12
Image 12
GE RM94940 instruction manual Programming For CD