![](/images/new-backgrounds/1244222/2442223x1.webp)
94940 Revised Size 10/18/02 12:22 PM Page 2
Thank you for purchasing the GE Universal Remote Control. This product is designed to provide years of service operating a wide variety of video and audio equipment.
Please retain this guide for future reference.
Table of Contents
Install the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Button
This Universal Remote Control is already programmed for most GE, RCA and ProScan TVs, VCRs, DBS Systems, DVD Players, and Audio/Video Receivers.
NOTE: For users of GE, RCA and ProScan DBS Products, older DBS models require that the DISPLAY Button on this remote be used to make program selec- tions. Use the SELECT Button for making program selections on newer GE, RCAand ProScan DBS models.
Battery Installation
Your Universal Remote Control requires 2 AAA alka- line batteries.
To install the batteries:
1.Turn the remote over and push down on the cover and slide it off.
2.Insert the batteries, matching the batteries to the (+) mark inside the battery case.
3.Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required.
1