94940 Revised Size 10/18/02 12:22 PM Page 9
Programming For DVD
Most GE, RCAand ProScan DVD systems will not require programming. Check to see if your DVD sys- tem responds to the remote before you begin pro- gramming.
1.Manually turn on the DVD system. Find the three digit code for your DVD system at the back of the instructions.
2.Press and hold the
CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3.Press and release the DVD button (The INDI- CATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your DVD system and press the ON•OFF but- ton. Your DVD system should turn off.
6.If the DVD System responds, no further programming is required.
NOTE: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on Page 12.
7.Enter your code here for easy reference.
8