GE SERIES B 480 user manual Agency Approvals, Performance

g

GE Capacitor & Power Quality Products

SPECIFICATIONS - continued

Ambient Temperature (Operating)
Enclosed Filters:	-40 to +40 degrees C
Open Panel Filters:	-40 to +50 degrees C
Storage Temperature:	-40 to +90 degrees C

Altitude: 0 to 3300 Feet above sea level. Refer to Figure 6 for altitude derating.

Relative Humidity: 0 to 95% non-condensing

Agency Approvals

UL-508C	File E191686 Component Recognized
	(3-1000 HP, 120 VAC through 600 VAC
	50, 50/60, 60 Hz Three Phases
CAN/CSA	C22, 2 No. 14-95

Performance

Total Harmonic Current Distortion:
Eight Percent Filter: 8% typical at full load	12% maximum no load to full load
Five Percent Filter: 5% typical at full load	8% maximum no load to full load
Standby Current:

Without Optional Capacitor Contactor: 70% of the full load capacitor current listed in Table 3

With Optional Capacitor Contactor: Refer to Drive Users Manual

8% Filter Voltage Regulation with nominal 480 volts RMS source Maximum output voltage at no load: 502 volts RMS, 710 volts peak

Maximum PCC* voltage with 6.00% source impedance at no load: 490 volts RMS, 693 volts peak

Minimum output voltage at full load: 460 volts RMS, 600 volts peak

5% Filter Voltage Regulation with nominal 480 volts RMS source Maximum output voltage at no load: 502 volts RMS, 710 volts peak

Maximum PCC voltage with 6.00% source impedance at no load: 490 volts RMS, 693 volts peak

Minimum output voltage at full load: 460 volts RMS, 600 volts peak

*Note: PCC is the point of common coupling with the power distribution system

GEH-7252 6 May 2003