Preparing to install your washer.

Before you begin–Read these instructions completely and carefully.

IMPORTANT–OBSERVE ALL GOVERNING CODES AND ORDINANCES.

Note–This appliance must be properly grounded, and electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.

Location of Your Washer

Safety Instructions

Do Not Install the Washer:

1 In an area exposed to dripping water or outside weather conditions. The ambient temperature should never be below 60°F (15.6°C) for proper washer operation.

2 In an area where it will come in contact with curtains or drapes.

3 In an area (garage-type building) where gasoline or other flammables are kept or stored (including automobiles).

4 On carpet. The floor MUST be solid with a maximum slope of 1/2″ per foot (1.27 cm per 30.5 cm). To make sure the washer does not vibrate or move, you may have to reinforce the floor.

IMPORTANT:

Minimum Installation Clearances

When installed in alcove: Sides, Rear, Top = 0″ (0 cm)

When installed in closet: Sides, Rear, Top = 0″ (0 cm), Front = 1″ (2.54 cm)

Closet door ventilation openings required:

2 louvers each 60 square in. (387 cm2), located 3″ (7.6 cm) from top and bottom of door

Operating Instructions Installation

Undercounter Installation

Mobile Home Installation

If an undercounter* installation is desired, you

Installation must conform to Standard for Mobile

MUST install a top sheet kit, 14-A037. This kit is

Homes, ANSI A119.1 and National Mobile Home

available from an authorized parts distributor.

Construction and Safety Standards Act of 1974

*Custom-sized countertop is required.

(PL93-383).

 

Tools Required for Washer Installation

1/4″ nut driver

3/8″ socket with ratchet

3/8″ open-end wrench

7/16″ socket with ratchet

9/16″ open-end wrench

Channel-lock adjustable pliers

Carpenter’s level

11

Instructions Troubleshooting Tips

Customer Service

Page 11
Image 11
GE SH208 owner manual Preparing to install your washer, Location of Your Washer, Tools Required for Washer Installation