Using the Remote Control
Buttons
Component Buttons
Press one of the buttons to set the remote to operate that component.
OFF | TV | VCR 1 |
| TV•VCR | VCR 2 |
| PLAY |
|
REW.F.FWD
STOP
REC•OTR F.ADV PAUSE
TV
Turns on a compatible GE, RCA, or ProScan TV and sets the remote to control the TV.
See page 14.
Used with OFF button to turn on compatible TV after TV button is programmed. See page 14.
VCR1
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control the VCR.
VCR2
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control the VCR when it has been setup. See page 13.
VOLUME | PREV CH | CHANNEL |
MUTE
VCR Function Buttons
Press VCR1 (VCR2) to set remote to control the VCR to use the function buttons.
1 2 3
4 5 6
7 8 9
DISPLAYINPUT
0
SEARCH
SLOW TRACKING
MENU CLEAR SPEED EDIT
PROG
CHANNEL up or down
Selects next higher or lower channel in the VCRÕs channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when setting the clock or VCR for a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected VCRs to begin copying a tape. See page 31.
F.ADV (Frame Advance)
Lets you view one frame with each press of the button when tape is in
INPUT
Turns the line input on or off. LINE appears in the VCRÕs display panel and VIDEO appears on the TV screen.
Line input refers to the signal coming from the component connected to the audio/video jacks on the back of the VCR.
MENU PROG
Displays the VCR MAIN MENU on the TV screen.
Used to program the VCR.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
F.FWD (Fast Forward) | OFF |
Fast forwards the tape when the | Turns off VCR when remote is set |
VCR is stopped. | to control the VCR. |
Searches the picture in forward |
|
motion during playback. |
|
11
