GE VG4258 manual Place channels in the VCR’s memory, Press Menu on remote to display the VCR Main

Setting Up the VCR

Startup

5.Select the language/Seleccione el idioma/ Sélectionner la langue.

The VCR displays the on-screen menus in the English, Spanish or French language. The word ÒLanguageÓ cycles through the different languages when the VCR Main Menu is displayed on the TV screen. The arrow indicates which language is selected.

A. Press MENU on remote to display the VCR MAIN

MENU.

B. Press 7 to display the LANGUAGE or IDIOMA or LANGUE menu. (English: LANGUAGE; Spanish: IDIOMA; French: LANGUE).

¥Press 1 to have the menus displayed in English (Ingles).

¥Press 2 to have the menus displayed in Spanish (Espa–ol).

¥Press 3 to have the menus displayed in French (Fran•ais).

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3 Set Clock

4 Channels

5Preferences

6 Audio

7 Language

LANGUAG

Select a language.

1➛English

2Español

3 Français

Press MENU to continue

6. Place channels in the VCR’s memory.

The AUTO CHANNEL SEARCH feature memorizes the channel list available through your signal typeÑcable or antenna. The signal type is automatically selected when you auto channel search. Also, if you change your signal system, you must perform AUTO CHANNEL SEARCH again.

Wait until the channel numbers stop changing. This takes about one to two minutes. The TV tunes to the lowest channel found. Pressing CHANNEL up or down selects only the active channels.

A. Press MENU to display the VCR MAIN MENU on the TV screen. If this menu does not appear:

¥Make sure the TV is tuned to same channel as the CH 3/4 switch on the VCR or the TVÕs video input (refer to TVÕs manual).

¥If you use a basic hookup, check the VCR indicator in display panel Ñ it should be on. Press TV•VCR to turn it on.

¥Check the connections.

B. Press 4 to display the CHANNELS menu.

C. Press 1 to begin AUTO CHANNEL SEARCH.

The VCR automatically selects the CABLE (cable TV) or ANTENNA signal. For cable connection, 125 channels are searched; for an antenna connection, 69 channels are searched.

To change the Signal Type:

A. Follow steps A-B above.

B. Press 3 to switch the Signal Type between CABLE and

ANTENNA.

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3 Set Clock

4 Channels

5Preferences

6 Audio

7 Language

0 Exit

CHANNELS

1 Auto Channel Search

2 Add/Remove Channels

3 Signal Type: ANTENNA

4 VCR Plus+ Channel List

5 Cable Box Setup

0 Exit

AUTO CHANNEL SEARCH

Now scanning channel 14

Press any key to cancel

8