Playing a Tape
Using the Playback Features
DISPLAY Button
The DISPLAY button shows the status of the VCR channel number, time counter, date, time and tape speed on the TV screen. The time and date must be set before they can be displayed.
1.Press DISPLAY to display the status of the VCR,
If you do not press DISPLAY again, these displays will time out. The time appears in the display panel.
2.Press DISPLAY again to have only the time counter remain on the TV screen.
The time counter appears instead of the time in the VCR display panel.
3.Press DISPLAY again to remove the time counter from the TV screen.
No displays appear on the TV screen. This is convenient for copying tapes. The time counter remains in the VCRÕs display panel.
4.Press DISPLAY again to return to the normal status displays.
Turning off the VCR automatically returns the displays to normal.
Press
DISPLAY 
Press
DISPLAY
Again
Press
DISPLAY
Again
STOP CH 05 0:30:00
Status Displays
Will Time Out
08/04/96 SUN 01:30AM SLP
0:30:00
Time Counter Only
Will Not Time Out
No displays
Time Counter
The time counter shows the elapsed time it takes to record a program or play back a segment of a prerecorded tape. It helps locate the beginning or end of programs you taped. The time counter resets to 0:00:00 whenever the tape is ejected from the VCR.
For example, if a
1.Insert the prerecorded tape, and make sure it is rewound to the beginning. Press STOP.
2.Press DISPLAY twice to display only the time counter on the TV screen.
3.Press CLEAR to reset the time counter to
0:00:00.
4.Press F.FWD to fast forward the tape until the time counter reads 0:30:00.
5. Press STOP. This is the approximate end of the program and you can begin recording at this spot.
6.Press DISPLAY twice to remove the time counter from the screen and return to the normal displays.
0:30:00
Hours |
Minutes |
Seconds |
18
