Installation Instructions
Pre-Installation Checklist cont.
To Remove the Door (if necessary)
Door removal is not a requirement for installation of the product, but is an added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge | Hinge | |
locks down toward | Unlocked | |
Position | ||
the door frame, | Hinge | |
to the unlocked | Slot | |
position. This may |
| |
require a flat blade | Hinge | |
screwdriver. | ||
Arm |
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place the oven on a table or platform even with the cutout opening. (Platform must support 175 lbs.
[79 kg] single, 350 lbs. [159 kg] double.)
Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top of the unit.
Place hands on both sides of the door, and close the oven door to the removal position, which is most of the way.
Removal Position
Lift door up and out until the hinge arms clear the slots.
Hinge Clears Slot
NOTE: The oven door is very heavy. Be sure you have a firm grip before lifting the oven door off the hinges. Use caution once the door is removed. Do not lay the door on its handle. This could cause dents or scratches.
4